Power only, Power with additional i/o, Onal i/o. refer to the – National Instruments NI Vision NI 17xx User Manual

Page 6

Advertising
background image

Getting Started with the NI 17xx Smart Camera

6

ni.com

Power Only

Refer to Figure 1 while completing the following steps to connect the NI desktop power supply to the
NI Smart Camera with no additional I/O.

Figure 1.

Connecting the NI Smart Camera to the NI Desktop Power Supply

1.

Connect and secure the 15-pin D-SUB connector on the NI desktop power supply to the
POWER-I/O connector on the smart camera.

2.

Plug the power supply power cord into the power supply.

3.

Plug the power supply into an outlet.

When power is first applied to the smart camera, the POWER LED flashes red for one second while
internal systems power up. The POWER LED then lights green when power is correctly wired to the
smart camera.

Power with Additional I/O

National Instruments provides the following two cable options for connecting a third-party power
supply and I/O to the NI Smart Camera.

Terminal block with a 15-pin D-SUB connector, such as the NI Smart Camera I/O Accessory, and
a 15-pin D-SUB to 15-pin D-SUB cable

15-pin D-SUB pigtail cable

Refer to Figure 2 while completing the following steps to connect a third-party power supply and I/O to
the smart camera using either a terminal block or the pigtail cable.

Figure 2.

Connecting the NI Smart Camera to a Third-Party Power Supply

1

NI Smart Camera

2

Power Supply

1

NI Smart Camera

2

15-Pin D-SUB to 15-Pin D-SUB Cable

3

Optional Terminal Block

4

Power Supply

2

1

1

3

2

4

Advertising