RCA 26970 - Manual (Page 26)

26
C
ALLER
ID
Problem Solution
No Display • Is battery fully charged? Try replacing the battery.
• If you are using AC power, make sure that the unit is
connected to a non-switched electrical outlet. Disconnect the
unit from the plug and plug it in again.
• Did you order Caller ID service from your local telephone
company? The display won't work unless you order Caller ID
service from your phone company.
Caller ID Error Message • The unit displays this message if it detects anything other
than valid Caller ID information during the silent period after
the first ring. This message indicates either the presence of
noises on the line, or that an invalid message has been sent
from the telephone company.
S
ERVICE
The FCC requires this product to be serviced only by the manufacturer or its
authorized service agents. In accordance with FCC requirements, changes or
modifications not expressly approved by ATLINKS USA could void the user’s
authority to operate this product. For instructions on how to obtain service, refer
to the warranty included in this Guide.
Attach your sales receipt to the booklet for future reference or jot down the date
this product was purchased or received as a gift. This information will be valuable
if service should be required during the warranty period.
Purchase date ________________ Name of store ___________________________