Preface, When using outside japan – Renesas Emulation Pod M306V2T-RPD-E User Manual
Page 5
( 3 / 72 )
Preface
The M306V2T-RPD-E is an emulation pod for the M306V2 and M306V5 of 16-bit microcomputers.
It's used with a PC4701 emulator.
This user's manual mainly describes specifications of the M306V2T-RPD-E emulation pod and how
to setup it. For details on the following products, which are used with M306V2T-RPD-E, refer to each
product's user's manual.
• Emulator: PC4701M/PC4701HS/PC4701L User's Manual
• Emulator debugger: M3T-PD30 User's Manual
All the components of this product are shown in "2.2 Package Components" (page 19) of this user's
manual. If there is any question or doubt about this product, contact your local distributor.
To use the product properly
Precautions for Safety
• In both this User's Manual and on the product itself, several icons are used to insure
proper handling of this product and also to prevent injuries to you or other persons,
or damage to your properties.
• The icons' graphic images and meanings are given in "Chapter 1. Precautions for
Safety". Be sure to read this chapter before using the product.
When using outside Japan
• When using in Europe, the United States, or Canada, be sure to use both the emulator
and the emulation pod which meet overseas standards. EMI standards are not met
when the M306V2T-RPD-E is used with the PC4700H or PC4700L emulator.