Radio Shack PRO-63 - Manual (Page 11)

11
• Never mix rechargeable and non-rechargeable batteries,
or rechargeable batteries of different capacities.
5. Insert six batteries in the battery holder as indicated by the
polarity symbols (+ and – ) marked on the battery holder and
inside the battery compartment.
6. Replace the battery holder in the battery compartment.
Caution: The battery holder fits only one way inside the bat-
tery compartment. Do not force it.
7. Replace the battery compartment cover.
If BATT flashes on the display and the scanner beeps, immedi-
ately replace all six non-rechargeable batteries, or recharge all six
rechargeable batteries. See “Important Information About the
PWR and CHG Jacks” and “Charging Nickel-Cadmium Batteries”
on Page 12.
Important: This product is capable of using rechargeable nickel-
cadmium batteries. At the end of the batteries’ useful life, they
must be recycled or disposed of properly. Contact your local,
county, or state hazardous waste management authorities for in-
formation on recycling or disposal programs in your area. Some
options that might be available are: municipal curb-side collection,
drop-off boxes at retailers, recycling collection centers, and mail-
back programs.
20-561.fm Page 11 Wednesday, August 4, 1999 3:48 PM