RCA CDRW120 - Manual (Page 16)

Chapter 2: Playing CDs
14 Chapter 2
4. To program the next track, press TIME SET/PROGRAM again (or TIME SET/PROG on
the remote control).
5. Enter the second track using the number buttons on the remote or the SKIP/SEARCH
arrow buttons on the front of the recorder.
6. To select the second track, press TIME SET/PROGRAM (or TIME SET/PROG on the
remote control) (OK appears).
7. Enter any additional tracks using steps 4-6.
8. When finished, press STOP to stop programming.
• To review your programmed tracks, press and release the left SKIP/SEARCH arrow
button repeatedly to scroll through the tracks (the tracks appear, with the last track
you programmed showing first).
• To play your programmed tracks, press PLAY (the tracks play in the order you
programmed them).
• To clear your programmed tracks, press and release STOP until PROG. disappears
from the display.
Note: Programmed tracks are cleared if either disc tray is opened.
Repeat
You can repeat a single track, an entire disc, just your programmed tracks, or both discs A
and B. All repeat modes will continue to play until you turn them off.
Press and release the REPEAT button repeatedly to scroll through the modes:
REPEAT 1 – repeats the current track
REPEAT – repeats the current disc or programmed tracks
REPEAT ALL – repeats all discs or programmed tracks
Random
You can play your programmed tracks and both disc A and B in random order.
1. To start random play, press the RANDOM button on the remote (RANDOM appears).
2. To stop random play, press RANDOM again (RANDOM disappears).
Note: If you open either disc tray, random play is stopped.
15920520.02 Playing CDs 9/24/02, 3:55 PM 14