Installer, Component guide, Keypad front panel – Russound CAS44 User Manual
Page 15
15
Source
DVD CABLE
XM1 AM/FM
INSTALLER
COMPONENT GUIDE
Keypad Front Panel
1
The update jumper for the KP4 (and KPL) is located on the right side of the keypad when facing front.
This is covered when a trim plate is installed.
Note: The update pins on the KP4 are accessed from
the side when the keypad is not installed.
OS UPDATE/RUN JUMPER -The pins are
jumpered when performing a firmware
update on the keypad, and removed
during normal operation.
OS UPDATE PORT - Used to update the
KP4 and KPL keypad operating system
firmware. If an update is released, it will
be available online through the
Document Center on
www.russound.com. Look in the
“Firmware and Downloads” section under
Multi-Zone product type. The Advanced
Programming Cable is available from
Russound, Part #2500-521065.
1
2
KP4 Front View
2
KP4 Top View
2
KP4 Side View
1
Jumpered
pins