Radio Shack Talking 360 - Manual (Page 17)

17 Operation
OPERATION SETTINGS
Selecting the City and Highway Modes
Your detector has two operating modes: city and highway. In
city mode, the detector requires a stronger X-, K-, or Ka-band
signal before it sounds or displays an alert.
Notes:
• City mode helps prevent false alerts in tightly populated
areas where radar signals can bounce off surrounding
structures.
• The city mode has no effect on laser alerts or instant-on
radar.
The highway mode provides maximum sensitivity for open-road
driving. The detector is preset to highway mode and
HWY ap-
pears on the display when you turn it on.
To select the city mode, press CITY . The voice says “City
mode,” and CTY appears on the display.
To return to the highway mode, press CITY again. The voice
alert says “Highway mode,” and HWY appears on the display
again.
Selecting Display Brightness
You can select from three levels of brightness for your radar de-
tector: bright, dim, and dark. Once you set the display
brightness, the detector retains the setting until you change it.