Radio Shack 43-3557 - Manual (Page 23)

Memory
Diali
n
g
23
M
AKING
C
ALLS WITH
M
EMORY
D
IALING
Memory Dialing from Standby
Mode
1. Press MEM . The handset displays your
programmed memory locations.
2. Press VOL or VOL keys, or enter
the number ( 0 - 9 ) to select the memory
location you would like to dial. Ô
3. Press TALK/FLASH . ¨ Talk ¨ and the
volume setting appear on the display.
Then the displayed number is dialed. Ô
Memory Dialing from Talk Mode
1. Press TALK/FLASH . ¨ Talk ¨ and the
volume setting appears.
2. Press MEM .
3. Press VOL or VOL keys or enter a
number ( 0 - 9 ) to select the memory
location of the desired phone number.
The selected name is displayed. Ô
4. The phone number in the memory will
be dialed when the SELECT key is
pressed.
5. To hang up, press END .
C
HAIN
D
IALING
The memory locations on the handset are
not limited to phone numbers. You can also
store a group of numbers (up to 20 digits)
that you need to enter once your call
connects. This is referred to as Chain
Dialing.
Ô
NOTES
Ô
Memory Dialing from
Standby Mode
•
If you press SELECT
before TALK/FLASH,
you can confirm the
name and the number
stored in the selected
memory location.
• To exit the memory
function without dialing,
press END. The
handset returns to the
standby mode.
• Whenever you are
using a memory menu
screen, you must press
a key within 30 seconds
or the phone will return
to the standby mode.
Memory dialing from Talk
Mode
If you select a memory
location that does not have
a stored number, the
phone will not dial.
43-3557.book 23 ページ ２００３年１２月１７日 水曜日 午後４時５４分