Ryobi RS280VS - Manual (Page 6)

6
SPECIFICATIONS
UNPACKING
INSTRUCTIONS
Your sander has been shipped completely assembled.
■ Carefully remove the tool and accessories from the
box. Make sure that all items listed in the packing
list are included.
■ Inspect the tool carefully to make sure no breakage
or damage occurred during shipping.
■ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
tool.
■ If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
APPLICATIONS
You may use your sander for the purposes listed below:
■ Sanding wood surfaces.
■ Sanding steel surfaces.
■ Removing rust from steel surfaces.
Sanding Disc Diameter 5 in. (12.7 cm)
Motion Random Orbit
Orbit Diameter 3/32 in. (2.4 mm)
No Load Speed 7,000 - 12,000 Orbits/Min.
Input 120 Volts, 60 Hz, AC only, 2.8 amps
Net Weight 3-1/2 lbs. (1.6 kg.)
PACKING LIST
Random Orbit Sander
Sandpaper (3 sheets)
Conversion Pad
Operator’s Manual
WARNING:
If any parts are missing do not operate your tool until
the missing parts are replaced. Failure to do so
could result in possible serious personal injury.