Radio Shack MICRO-33 User Manual
Page 6
6
Preparation
• If you do not plan to use the recorder
with batteries for several days or
more, remove the batteries. Batteries
can leak chemicals that can destroy
electronic parts.
When the REC/BATT indicator does not
light, lights dimly during manual recording,
or the recorder stops operating properly,
replace the batteries.
1. Slide the battery compartment cover
in the direction of the arrow until it
stops, then lift up the cover.
Caution: The battery compartment
cover is attached to the recorder. Do
not try to remove it.
2. Insert the batteries into the compart-
ment as indicated by the polarity sym-
bols (+ and –) marked on the back of
the recorder.
3. To close the battery compartment
cover, hold the cover down against
the recorder and slide it in the oppo-
site direction of the arrow.
Using AC or DC Power
To power the recorder from an AC outlet
or your vehicles battery power, you need
14-1045reimage.fm Page 6 Friday, January 12, 2001 3:56 PM