Effects (basic), Naming a kit, Effects (basic) naming a kit – Roland HandSonic 10 User Manual
Page 14: Short cut access to effects editing
12
Getting Familiar
1.
Press [KIT], then press [STEEL DRUM], then [EDIT], so you see
<INST> in the display again.
2.
Press the [
] cursor until you see <EFFECTS> in the display.
Verify that the [EFFECT] button is also lit.
3.
Press the [ ] and you will see <Type> in the display.
1.
Press [KIT], then press [STEEL DRUM], then [EDIT] so you see
<INST> in the display again.
2.
Press the [
] cursor until you see <KIT/MIDI> in the display.
3.
Press the [ ], and you will see <Kit Volume>.
4.
Press the [
] again and you will see:
5.
Use the [+]/[-] buttons or Control knob to change the name as you desire.
Use the [
] or [
] to move between the letters.
EFFECTS (Basic)
Naming a Kit
EDIT Button
CURSOR
KIT Button
STEEL DRUM Button
EFFECT Button
Short Cut Access to Effects Editing
While holding down the [EDIT] button, press [EFFECT].
HPD-10_e1.book 12 ページ ２００６年４月７日 金曜日 午後２時１４分