Ryobi HP41LK - Manual (Page 13)

13
BATTERy PAck REMOvAL ANd PREPARATION
FOR REcycLING
See Figure 7.

Remove the four screws securing motor housing cover,
then remove cover.
 Lift batteries from motor housing enough to expose leads
and battery terminals.
 Disconnect the red lead from the battery by pulling apart
as shown.
 Disconnect the black lead from the battery by pulling
apart as shown.
NOTE: Be careful not to break battery leads when
disconnecting them.
 Remove the battery for disposal.
To preserve natural resources, please recycle or dispose of
batteries properly.
This product contains lithium-ion
batteries. Local, state or federal laws
may prohibit disposal of batteries in
ordinary trash.
Consult your local waste authority
for information regarding available
recycling and/or disposal options.
BATTERY
BATTERY
LEAD
MOTOR
HOUSING
SCREW(S)
BATTERY
TERMINAL
BATTERY
TERMINAL
wARNING:
Upon removal, cover the battery pack’s terminals with
heavy-duty adhesive tape. Do not attempt to destroy or
disassemble battery pack or remove any of its compo-
nents. Lithium-ion batteries must be recycled or disposed
of properly. Also, never touch both terminals with metal
objects and/or body parts as short circuit may result.
Keep away from children. Failure to comply with these
warnings could result in fire and/or serious injury.
Li - Ion
Fig. 7
MAINTENANcE