RAD Data comm 4-Wire Symmetrical VDSL Modem ASM-60 - Manual (Page 36)

Chapter 4 Management from a Terminal ASM-60 Installation and Operation Manual
4-4 Configuring ASM-60
ASM-60/CO Main Menu
1. Configuration
2. Display
3. Test
4. Reset
5. Debug
>
ESC - previous menu ; ! - main menu ; & - exit terminal
-------------------------------------------------------
Figure 4-2. Main Menu
At the bottom of the terminal screen, ASM-60 displays the latest alarms as they
enter the alarm log.
4.4 Configuring ASM-60
This section describes the configuration procedures for the ASM-60 modem.
To display the Configuration menu:
• From the Main menu, type 1, and then press <Enter>.
The Configuration menu appears (see Figure 4-3 ).
ASM-60/CO Configuration
1. Data Rate (current value)
>
ESC - previous menu ; ! - main menu ; & - exit terminal
-------------------------------------------------------
Figure 4-3. Configuration Menu
Selecting the Data Rate
The Data Rate menu allows you to select the ASM-60 transmission rate.
To select the data rate:
1. From the Configuration menu, type 1.
The Data Rate menu appears (see Figure 4-3 ).
2. Select the data rate by typing the number corresponding to the desired value
and then type 2 to save the changes.
Main Menu
↓ 1
Configuration
↓ 1
Data Rate
Note