Radio Shack 43-3871 - Manual (Page 34)

Pho
nebook
34
6. Distinctive Ring appears. Press
VOL/RING/ or VOL/RING/ to move
the pointer to one of the Distinctive
Ring options, and then press
SELECT/
. Ô
7. Speed Dial appears. Press
VOL/RING/ or VOL/RING/ to move
the pointer to select the Speed dial
location (10 locations: SPD1-SPD0).
Ô
8. Press SELECT/ . You will hear a
confirmation tone, and Done! appears
in the display.
S TEPS FOR E NTERING N AMES
AND S PECIAL C HARACTERS
Refer to the letters on the number keys to
select the desired characters. With each
press of a number key (
0 - 9 ), the displayed
character appears in the following order:
upper case letters first, lower case letters
next and finally the number corresponding
to the key.
Ô
NOTES
Ô
• If you choose not to
store a “Distinctive
Ring”, simply select the
“No Selectn” option.
• Selecting a speed dial
location where a number
is already stored,
releases the old
number’s speed dial
setting. The new number
will be stored in the
speed dial location.
• If you choose not to
store the name/number
as a Speed Dial, simply
select the “No Selectn”
option.
Number of times key is pressed