Roberts Radio ecologic 2 User Manual
Page 16
Advertising

15
Manual tuning - FM
1. Press
the
On/Off button to switch on your radio.
2. Press
the
Band button to select the FM band. Fully extend the Tel-
escopic aerial.
3. Press and release the Select button until the display shows "Manual
tune <>".
4. Press either of the Tuning Up or Down buttons to tune to a station.
The frequency will change in steps of 50kHz.
5. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
6. Set
the
Volume control to the required setting.
7. To switch off your radio press the On/Off button.
2
1
4
3
Advertising