Radio Shack 63-255 - Manual (Page 10)

10
1. Follow Steps 1 and 2 under “Use the
Stopwatch.”
2. When the first lap is
finished, press SET.
The stopwatch display
freezes, but the
stopwatch continues to
run in the background.
: flashes.
3. When you have documented the lap time,
press SET. The display changes to show the
advancing time.
4. Repeat Steps 2-3 for each additional lap.
Reset Stopwatch to
0:00 00
• If the stopwatch is not counting (: not
flashing), press SET.
• If the stopwatch is counting time, press ADJ
then SET. The watch announces “all clear.”
• If the stopwatch is in lap mode (: is flashing
but digits not changing), press ADJ then
SET twice.