RCA RTD260 - Manual (Page 10)

Illustrations contained in this document are for representation only.
Connections and Setup
8
Front Surround Mode Speaker Placement
Configuration 1
Follow the suggestion for speaker placement on
page 6 and 7.
Setting the Speaker Stands (Optional)
Speaker stands is provided in this package. Optionally, you can set the speaker stands by following
the instruction.
Installing the Stand Bases
1. Attach the base bar to the circular base.
2. Tighten the screw nut provided to the circular base to secure the base bar as illustrated.
3. Insert the upper bar into the base bar.
4. Rotate the plastic lock clockwise to lock.
5. Attach the speaker holder to the speaker stand.
1
Configuration 1
EN
Exploded Drawing
1
2
3
Exploded Drawing
4 5
RTD260 EN (07_06_06) 15/6/06 4:34 PM Page 12