Connecting the handset, Setting the dialing mode – Radio Shack SYSTEM 212 User Manual

Page 11

Advertising
background image

11

CONNECTING THE
HANDSET

Plug one end of the coiled cord into the
modular jack on the handset. Then con-
nect it to the jack on the side of the tele-
phone base. Place the handset in the
cradle.

You might prefer a longer cord for the
handset. Your local RadioShack store
has a wide selection of telephone acces-
sories, including longer coiled handset
cords.

SETTING THE DIALING
MODE

Follow these steps to set the phone for
the type of service you have — tone or
pulse. Since the phone is preset for tone
service, you do not need to change it un-
less you have pulse service.

1. Press

PROGRAM

.

2. Press

and # at the same time,

then

again.

3. Press

0 if you have tone service, or

press 1 if you have pulse service.

4. Press

PRIVACY

to store the setting.

The phone rings once.

43-463.fm Page 11 Friday, August 13, 1999 9:06 AM

Advertising