Appendix f: configure port forwarding manually – Rosewill RXS-4324 User Manual

Page 69

Advertising
background image

Internet Camera

RXS-3323/RXS-4324 User Manual

Appendix F: Configure Port Forwarding Manually

If you want to access the Camera over the internet, you will need to use it together with a router /

wireless router. The Camera’s IP address needs to be setup as fixed IP address. You will also need

to set up the port forwarding or Virtual Server function of router. Please follow the steps as below:

Manually installing the device with a router on your network is an easy 3–step procedure as

following:

(1) Assign a local/fixed IP address to your device

(2) Access the Router with Your Web browser

(3) Open/Configure Virtual Server Ports of Your Router

(1) Assign a local/fixed IP address to your device

The device must be assigned a local and fixed IP Address that allows it to be recognized by

the router. Manually setup the device with a fixed IP address, for example, 192.168.0.100.

(2) Access the Router with Your Web browser

The following steps generally apply to any router that you have on your network. The D-Link

DI-624 is used as an example to clarify the configuration process. Configure the initial

settings of the router by following the steps outlined in the router’s Quick Installation Guide.

If you have cable or DSL service, you will most likely have a dynamically assigned WAN IP

Address. ‘Dynamic’ means that your router’s WAN IP address can change from time to time

depending on your ISP. A dynamic WAN IP Address identifies your router on the public

network and allows it to access the Internet. To find out what your router’s WAN IP Address

is, go to the Status screen on your router and locate the WAN information for your router. As

shown on the following page the WAN IP Address will be listed. This will be the address that

you will need to type in your web browser to view your camera over the Internet. Be sure to

uncheck the Reset IP address at next boot button at the top of the screen after modifying the

IP address. Failure to do so will reset the IP address when you restart your computer.

69

Advertising
This manual is related to the following products: