Roberts Radio RD-41 - Manual (Page 58)

57
Factory reset
This setting clears all station presets, service list, EPG and returns all
variable settings to their factory defaults.
1. Press the Mode button until the desired waveband is selected.
2. Press the Menu/Back button, the main Menu screen will be
selected.
3. Rotate the Tuning/Select control until "Settings" is highlighted
on the display. Press and release the Tuning/Select control.
4. Rotate the Tuning/Select control until "Factory reset" is highlighted
on the display. Press and release the Tuning/Select control.
5. Rotate the Tuning/Select control until "FACTORY RESET" is
highlighted on the display. Press and release the Tuning/Select
control.
6. The display will show resetting and after a few seconds your radio
will enter DAB autotune.
7. If you do not wish to carry out a factory reset rotate the Tuning/
Select control until "Back" is selected on the display.
8. The radio will return to the previous screen.
In case of malfunction due to electrostatic discharge, just reset the
product (reconnect of power source may be required) to resume
normal position.
5,6
3,4
1
2