RocketFish RF-NBACDC - Manual (Page 10)

10
2 Connect the selected tip to the end of the output cable,
making sure that the pins on the tip are aligned with the
holes in the cable. The ridge on the inside of the tip
should align with the groove in the output cable
connector. Also make sure that the tip is pushed all the
way into the cable’s connector.
3 Plug the power tip into your netbook computer.
4 Plug the DC power connector input cable into the power
adapter body.
5 Remove the vehicle cigarette lighter connector to reveal
the air connector, by holding the tab at the base of the
connector and sliding the cigarette lighter connector off.
6 Insert the adapter’s air connector into the in-seat power
socket, which is usually found on the arm of your seat or
under the seat. The adapter’s status light will glow when
powered. When the adapter has power, the status light
turns on. Your netbook is now powered.
Air connector Auto connector
To remove, hold
this tab and
slide the auto
connector off.
RF-NBACDC 09-0972_MAN_ENG_V1.fm Page 10 Monday, November 9, 2009 1:35 PM