Reliable MSK-1541S - Manual (Page 7)

11 11
13 13
12 12
13. Threading (Fig11)
14. Adjusting the stitch length (Fig.12)
15. Adjusting the thread tension (Fig.13)
Thread in the order as shown in Fig.
Turn the stitch length dial plate 1 leftward and
rightward to make the marker align with the required
figure. Press down the reverse feed lever 2 to start
backward sewing, and release it to start normal
sewing.
1.Adjusting the tension of the needle thread
Turn the nut 1 clockwise to increase the tension
of the needle thread; on the contrary, to reduce the
tension of the needle thread.
2.Adjusting the tension of the bobbin thread.
Turn the screw 2 clockwise to increase the tension
of the bobbin thread, on the contrary, to reduce the
tension of the bobbin thread.
Weaken
Strengthen
Weaken
Strengthen