Radio Shack Gigaware 25-157 - Manual

®
25-157
User’s Guide
2 3 4 5 6 7
Limited Warranty
Ignition L.P. warrants this product against defects in materials and workmanship under normal
use by the original purchaser for ninety (90) days after the date of purchase. IGNITION L.P.
MAKES NO OTHER EXPRESS WARRANTIES.
This warranty does not cover: (a) damage or failure caused by or attributable to abuse, misuse,
failure to follow instructions, improper installation or maintenance, alteration, accident, Acts
of God (such as floods or lightning), or excess voltage or current; (b) improper or incorrectly
performed repairs by persons who are not a Ignition L.P. Authorized Service Facility; (c)
consumables such as fuses or batteries; (d) ordinary wear and tear or cosmetic damage; (e)
transportation, shipping or insurance costs; (f) costs of product removal, installation, set-up
service, adjustment or reinstallation; and (g) claims by persons other than the original purchaser.
Should a problem occur that is covered by this warranty, take the product and the sales receipt
as proof of purchase date to the place of purchase. Ignition L.P. will, at its option, unless
otherwise provided by law: (a) repair the product without charge for parts and labor; (b) replace
the product with the same or a comparable product; or (c) refund the purchase price. All
replaced parts and products, and products on which a refund is made, become the property
of Ignition L.P. New or reconditioned parts and products may be used in the performance of
warranty service. Repaired or replaced parts and products are warranted for the remainder of
the original warranty period. You will be charged for repair or replacement of the product made
after the expiration of the warranty period.
IGNITION L.P. EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS NOT STATED
IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY
LAW, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND, IF APPLICABLE,
THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, SHALL EXPIRE ON
THE EXPIRATION OF THE STATED WARRANTY PERIOD.
EXCEPT AS DESCRIBED ABOVE, IGNITION L.P. SHALL HAVE NO LIABILITY OR
RESPONSIBILITY TO THE PURCHASER OF THE PRODUCT OR ANY OTHER PERSON
OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY
OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF
ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES
RESULTING FROM INCONVENIENCE AND ANY LOSS OF TIME, DATA, PROPERTY, REVENUE,
OR PROFIT AND ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
EVEN IF IGNITION L.P. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some States do not allow limitations on how long an implied warranty lasts or the exclusion or
limitation of incidental or consequential damages, so the above limitations or exclusions may
not apply to you. This warranty gives you specific legal rights, and you may also have other
rights which vary from State to State. You may contact Ignition L.P. at:
Ignition L.P., 3102 Maple Ave. Suite 450, Dallas, TX 75201 02/09
For product support, call 1-866-315-0426
Protect the environment by recyling used electronics.
Go to E-CyclingCentral.com to find an electronic recycling center near you.
Please read this user’s guide before using your new webcam.
Webcam with Mic
Package contents
s s
s s
Features
s
System requirements
s TM , Windows ® XP,
Windows 2000, Windows ME
s ® II 350 MHz CPU
s
1
Install Driver
1. Turn on your computer and
insert the driver CD.
2. When the Webcam with Mic
screen appears, click Driver
and follow the on-screen
instructions.
For Windows Vista users:
3. During installation, a User Account Control message may
appear asking you to cancel or allow program authorization
4
Enjoy your webcam
Video Conference
You can use your webcam for video conferences over the
internet. The driver on the driver CD is compatible with most
COMMON
Capture Still Images
1. Start VideoImpression 2.
2. Click Create a New Slide Show Æ Scan Image.
3. Select your camera from the list and follow on-screen
instructions to capture images.
4. Manually adjust focus.
To use other image capture software,
SEE
Capture Video
1. Start VideoImpression 2.
2. Click Create a New Video Æ
Capture From Device.
3. Adjust the webcam for best
picture quality. To adjust the color
or contrast click Settings.
4. Click to start recording and click to stop. The webcam
records in AVI format.
4O
n Note: To learn more about video editing tools, refer to the
VideoImpression application’s online help.
Specifications
Image Sensor .................................................. 
Lens Specification .......................................................... F2.4, f=4.9mm
White Balance ................................................................................. Auto
Exposure.......................................................................................... Auto
Frame Rate .......... 
Focus Range ........................................... Manual Focus, 1 cm to Infinity
Depth of Field ............................................................... 50 cm to Infinity
Video Format ..................................................................................... AVI
Video Capture Resolution ............................ 
Still Capture Resolution ...................................... 5P
Flicker Control....................................................................... (Z
Specifications are subject to change and improvement without notice. Actual product may vary from
the images found in this document.
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
s
is connected.
s
If you cannot eliminate the interference, the FCC requires that you stop using your product.
Changes or modifications not expressly approved by Ignition L.P. may cause interference and
VOID
Product Webcam with Mic
Model 25-157
Responsible
Party
Ignition L.P.
3102 Maple Ave. Suite 450 Dallas, TX 75201
0HONE
of the webcam software. Select Allow, then follow the
on-screen instructions.
2
Install VideoImpression 2
Go back to the installation
screen or reinsert the CD.
When the Webcam with Mic
screen appears, click ArcSoft
VideoImpression and follow the
on-screen instructions.
3
Connect to your
computer
1. Place the webcam on top of your monitor or on a flat
surface. Adjust the camera for the best angle.
2.
For Windows ME/Windows 2000/Windows XP users:
If the Found New Hardware wizard appears, follow the
on-screen instructions to complete installation.
For Windows Vista users:
When the Found New Hardware Wizard appears, click
Locate and install driver software (recommended), and
when Windows needs your permission to continue
appears, click Continue.
n Note: If the webcam does not function and your
computer does not detect the webcam, refer to your Windows
documentation for troubleshooting instructions.
12A09
25-157
Printed in China
Windows is a registered trademark and Windows Vista is a trademark
of Microsoft Corporation in the United States and/or other countries.
© 2009. Ignition L.P. All rights reserved.
Gigaware is a registered trademark used by Ignition L.P.
Capture Button
Focus Ring
Rotate to adjust the focus.
LED
Lights while in use.
Microphone
Located on the back,
near the USB cable.
Computer
Monitor