Ryobi TS1352 - Manual (Page 2)

Page 2
TABLE OF CONTENTS
PRODUCT SPECIFICATIONS
Blade Arbor 5/8 in. (16 mm)
Blade Diameter 10 in. (254 mm)
Rating 120 volts, 60Hz, AC Only
No Load Speed 5000 RPM
Input 15 Amperes
Net Weight 33.73 lbs. (15.3 kg.)
INTRODUCTION
Your saw has many features for making cutting operations
more pleasant and enjoyable. Safety, performance, and
dependability have been given top priority in the design of
this saw making it easy to maintain and operate.
WARNING:
Do not attempt to use the tool until you have read
thoroughly and understand completely the operator’s
manual. Pay close attention to the safety rules, including
Dangers, Warnings, and Cautions. If you use this tool
properly and only for what it is intended, you will enjoy
years of safe, reliable service.
Introduction and Product Specifications ...........................................................................................................................2
Rules for Safe Operation .............................................................................................................................................. 3-6
Glossary of Terms .............................................................................................................................................................6
Unpacking and Tools Needed ......................................................................................................................................... 7
Loose Parts .......................................................................................................................................................................8
Features ...................................................................................................................................................................... 9-11
Assembly ................................................................................................................................................................... 12-15
Adjustments .............................................................................................................................................................. 15-19
Operation .................................................................................................................................................................. 19-26
Laser Guide .............................................................................................................................................................. 27-28
Maintenance .................................................................................................................................................................. 29
Parts Ordering/Service .................................................................................................................................................. 30
WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning tool operation, always wear safety goggles or safety
glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety
Mask for use over eyeglasses or standard safety glasses with side shields. Always wear eye
protection which is marked to comply with ANSI Z87.1.
Look for this symbol to point out important safety precautions.
It means attention!!! Your safety is involved.