Radio Shack Vu Qube V10 - Manual (Page 7)

Vu Qube 7 V10-6/1007
Installation
(continued)
Mounting the bracket and selecting location to run wiring
./4%
1. Select and mark both area on back of cab to mount the bracket
AND location to run coaxial cable from the Vu Qube to the inside of
the cab.
s
coaxial cable.
s
so that the antenna can receive adequate signal. The clearance of the
Vu Qube is important because the antenna requires a direct line of
sight to the satellite in the southern sky to acquire a clear signal.
./4%
s
to be mounted.
s
wiring so that the co-axial cable does not
have a sharp bend.
s
OBSTRUCTION
s
directly to the frame (i.e. Headache Rack) will void the warranty.