Preparing hui operation, Setting up control surface mode in protools – Roland VS-2480CD User Manual
Page 12
2—Preparing Your Computer Software
12
www.RolandUS.com
Roland VS-2480 Control Surface Mode Guide
3.
Click Generic Remote. The window expands to show additional options.
4.
Select the MIDI input and output jacks, or “ports,” to which the VS-2480CD is
connected.
5.
Click Import.
6.
Navigate to the s124v6 file, select it click Open.
7.
Click Apply and then OK.
Preparing HUI Operation
The VS-2480CD’s HUI template makes the VS-2480CD act like a Mackie HUI control
surface that can control digidesign’s ProTools as well as Mark of the Unicorn’s
Performer. Neither program requires installation of a driver to work with the
VS-2480CD’s Control Surface mode. Both programs require configuration.
Setting Up Control Surface Mode in ProTools
1.
From the Setups menu, select Peripherals.
The Peripherals window appears.
Import button