Roberts Radio Gemini 28 RD-28 User Manual

Page 8

Advertising
background image

7

Finding new stations

As time passes new stations may become available. To fi nd new stations
proceed as follows:-

1. Press and release the Auto Tune button, the display will show Autotune

Quick scan. Your radio will perform a scan of the UK DAB frequencies.
As new stations are found the station counter on the right-hand side
of the display will increase and stations will be added to the list.

2. To carry out a full scan of the entire DAB Band III frequencies press

and hold down the Auto Tune button for more than 2 seconds and
then release. The display will show Autotune Full scan. As new stations
are found the station counter on the right-hand side of the display will
increase and stations will be added to the list.

Autoselect

As an alternative to pressing the Select button to select a station your
radio can be set so as to automatically select a station.

1. Rotate

the

Tuning control a few clicks in either direction, immedi-

ately press and hold down the Select button until the display shows
Autoselect ON.

2. Rotate

the

Tuning control until the station you require is visible on

the display. After a few seconds your radio will automatically select
the station shown on the display.

3. To switch off autoselect rotate the Tuning control a few clicks in either

direction, immediately press and hold down the Select button until
the display shows Autoselect OFF.

1

2

1

1

Advertising