Other functions (utility), P. 92), 92 detailed settings for each function ([edit]) – Roland RD-700 User Manual
Page 92: Bulk dump temporary
92
Detailed Settings for Each Function ([EDIT])
Edit Mode
Other Functions (Utility)
Utility includes functions for sending data to external MIDI
sequencers and other devices and for restoring the settings to
their original factory state.
For more on “Rec Setting” in Utility menu, refer to
Transferring the RD-700’s
Settings to an External MIDI
Device (Bulk Dump)
You can transfer the contents of Setups and the RD-700’s
system settings to an external MIDI device. This operation is
called “bulk dump.”
Use this procedure to save the data to an external MIDI
device in situations such as when you want to perform by
connecting another RD-700 with the same settings, or to
prevent your Setups and system settings from corruption.
1.
Use a MIDI cable (optional) to connect the RD-700’s
MIDI OUT connector to the MIDI IN connector on an
external sequencer.
2.
Press [EDIT] to turn it on.
The Edit Menu screen appears.
fig.Editmenu2.eps_150
3.
Press CURSOR [
] to select “9.Utility.”
4.
Press CURSOR [
] to display the Edit screen.
fig.utility1.eps_150
5.
Press CURSOR [
] or [
] to select “Bulk Dump
Temporary” or “Bulk Dump SETUP.”
NOTE
While the Bulk Dump is in progress, no sounds are produced
even when the keys are pressed. In addition, Rhythms and
arpeggios being played are also stopped.
Bulk Dump Temporary
6.
Press CURSOR [
].
A screen like the one shown below appears.
fig.Editmenu2.eps_150
7.
Put the external sequencer in record mode.
8.
Press [INC/YES] to transmit the settings.
To cancel the Bulk Dump, press [DEC/NO].
The message “Now, Executing...” appears in the display
during transmission of the data.
9.
After the transmitting is finished, the display will
indicate “COMPLETED.”
You are returned to the Edit screen.
10.
Stop the external sequencer.
Parameter
Value
Bulk Dump
Temporary
The contents of the currently se-
lected Setup are transmitted.
Bulk Dump SETUP
The contents of Setups in the
specified range are transmitted.
RD-700_e.book 92 ページ ２００３年１０月２３日 木曜日 午後４時５９分