Connecting the enclosure to your computer, 7rf-hd25 – RocketFish RF-HD25 User Manual
Page 9
7
RF-HD25
3
Slide the assembled tray into the bottom of the
enclosure, then put the top on the enclosure with the
Rocketfish logo on the opposite end as the one-touch
button and secure it with the four screws you previously
removed.
Connecting the enclosure to your
computer
Notes:
Connect the Hard Drive Enclosure to your computer before
inserting the software CD into your optical drive.
Connecting the enclosure to your computer
To connect the enclosure to your computer:
• Plug a USB 2.0 cable into the enclosure, then plug it into
your computer. We provide a USB 2.0 Y cable in the
package, which has two standard USB A male-type
connectors. One connector is for data and bus power
and the other connector is for additional power, if
RF-HD25_08-1730 - ENG.fm Page 7 Friday, October 10, 2008 1:21 PM