Chapter 26 – maintaining the router, Introduction, Alert system – RuggedCom RuggedRouter RX1000 User Manual
Page 237: Alert menu
Chapter 26 – Maintaining The Router
Chapter 26 – Maintaining The Router
Introduction
This chapter familiarizes the user with:
•
Viewing Alerts
•
Configuring and monitoring the Gauntlet Security Appliance
•
Backing up and restoring configurations
•
Configuring SNMP
•
Configuring Radius Authentication
•
Configuring Outgoing Mail
•
Using System Logs
•
Upgrading Software
•
Using Pre-upgrade/Post-upgrade scripts
•
Uploading and downloading files
Alert System
The alert system provides the following features:
●
Generates alerts, displaying them locally and/or forward them via
email messages.
●
Alerts are set and cleared by the daemons that own them. Active
alerts are locally displayed and can be cleared manually.
●
Multiple forwarders can be configured, a configurable filter level
controls alert forwarding to each forwarder.
●
By configuring different forwarders, low severity and high severity control
centers can be set up.
Each alert is mapped to an alert definition entry, which is predefined by a daemon
who owns the alert or by a user. All alert definition entries are configurable by user.
An alert filter is a user defined configuration to define the forwarders destination of
active alerts. Any active alerts with Renotify Interval set to non-zero value and
matches with the filter level will be forwarded to the defined forwarder destination.
Alert Menu
Figure 201: Alert Main Menu
RuggedCom 235