Roland AT15 - Manual (Page 52)

52
Using the Registration Buttons
Recalling a Registration
There are two ways of calling up the settings affecting the rhythms
registered to the Registration buttons [1]–[8], “INSTANT” and
“DELAYED.” At the factory this is set to “DELAYED.”
■ How to Recall a Registration
❍ Recalling Voices and Other Panel Settings
1.
Press a Registration [1]–[8] button.
❍
Recalling Settings for Rhythm and Automatic Accompaniment
in Addition to the Panel Settings
1.
Press and hold a Registration [1]–[8] button for several
seconds.
The indicator of the rhythm select button will blink, and the panel settings
and settings related to rhythm performance and automatic accompaniment
will be recalled.
■ Changing the Timing of Recalling Registrations
Settings for Rhythm play and Automatic Accompaniment are recalled when
you continue holding a Registration [1]–[8] button for several seconds, but
you can change this so that the settings are recalled the instant you press the
button.
1.
Press the [Utility] button.
2.
Press the Menu [ ] and [ ] buttons to select the
“Arranger Update.”
fig.07-02
3.
Press the Value [-] and [+] buttons to switch between
“ DELAYED ” and “ INSTANT. ”
To return to the basic screen, press the [Utility] button.
DELAYED
When you press and hold a Registration [1]–[8] button
for several seconds, the settings for Rhythm and
Automatic Accompaniment will be recalled in addition
to the panel settings. If you press and immediately
release a Registration [1]–[8] button, only the settings
that are not related to Rhythm or Automatic
Accompaniment will be recalled.
INSTANT
Settings for Rhythm and Automatic Accompaniment
will be recalled the instant that you press a Registration
[1]–[8] button.
You can change the timing
of recalling the transpose
setting when you press a
Registration [1]–[8] button.
For more information,
please refer to “Adjust the
Standard Pitch (Master
Tune)” (p. 93).
AT-15_e.book 52 ページ ２００５年１月２１日 金曜日 午後８時１４分