Roland RG-3 - Manual (Page 10)

8
IMPORTANT NOTES
Handling the CDs (CD-ROMs)
Add
• When handling the discs, please observe the following.
• Do not touch the encoded surface of the disc.
• Do not use in dusty areas.
• Do not leave the disc in direct sunlight or an enclosed
vehicle.
801
• Avoid touching or scratching the shiny underside
(encoded surface) of the disc. Damaged or dirty CD-ROM
discs may not be read properly. Keep your discs clean
using a commercially available CD cleaner.
Add
• Keep the disc in the case.
Add
• Do not keep the disc in the CD drive for a long time.
Add
• Do not put a sticker on the label of the disc.
Add
• Wipe the disc with a soft and dry cloth radially from
inside to outside. Do not wipe along circumference.
Add
• Do not use benzine, record cleaner spray or solvents of
any kind.
Add
• Do not bend the disc. Bending discs may prevent proper
reading and writing of data, and may further result in
malfunction.
Using USB Memory
704 (edit)
• When connecting USB memory, make sure to press it until
it is fully inserted.
705 (edit)
• Never touch the terminals of the USB memory. Also,
avoid getting the terminals dirty.
708
• USB memory is constructed using precision components;
handle the cards carefully, paying particular note to the
following.
• To prevent damage to the USB memory from static
electricity, be sure to discharge any static electricity
from your own body before handling the USB
memory.
• Do not touch or allow metal to come into contact with
the contact portion of the USB memory.
• Do not bend, drop, or subject USB memory to strong
shock or vibration.
• Do not keep USB memory in direct sunlight, in closed
vehicles, or other such locations (storage temperature:
0 to 50 ˚C).
• Do not allow USB memory to become wet.
• Do not disassemble or modify the USB memory.
Add
• Insert the USB memory in the Ext Memory port evenly
and without undue force. Forcing the USB memory may
damage the Ext Memory port.
Add
• Do not insert any object other than the USB memory (e.g.,
wires, coins, other types of disks, etc.) in the Ext Memory
port. This may damage the Ext Memory port.
Add
• Do not subject the Ext Memory port cover or connected
USB memory to excessive stress.
Add
• Close the USB memory cover when using the USB
memory for extended periods.
203
* GS ( ) is a registered trademark of Roland
Corporation.
204
* Microsoft and Windows are registered trademarks
of Microsoft Corporation.
209
* Mac OS is a trademark of Apple Computer, Inc.
Add
* XG lite ( ) is a registered trademark of Yamaha
Corporation.
Add
* This device in part makes use of Independent JPEG
Group software.
220
* All product names mentioned in this document are
trademarks or registered trademarks of their
respective owners.