Radio Shack TAD-727 - Manual (Page 26)

26
Note: It is illegal in some areas to record
a conversation without the consent of all
parties to the conversation, including the
phone company. Check the laws in your
area before you use the two-way record-
ing feature.
Using the Handset
Press REMOTE then MEMO REC/3 . The
TAD begins recording.
To send the contents of the recording
back to the caller through the telephone
line, press
PLAY/RPT/8 while recording.
To stop recording, press MEMO REC/3 .
Using the Base
Hold down MEMO REC on the base for
about 2 seconds. The recording starts.
To send the recorded contents you just
made back to the caller through the tele-
phone line, press
PLAY/REPEAT/ .
To stop recording, press MEMO REC .
Notes:
• To stop the playback, press
REMOTE on the handset, or press
STOP on the base.
• To repeat the playback, press PLAY/
RPT/8 on the handset, or press
PLAY/REPEAT/ on the base.
PLAYING MESSAGES
After a new message is recorded, A and
the number of all recorded messages
flash on the display alternately.
Notes:
• The maximum number of messages
that the display can show is 59. The
number does not change after that
even if you have received more
messages.
• When the TAD receives 59 mes-
sages (including your own outgoing
message), or the memory has less
than 15 seconds left,
F (full) and the
number of messages flash on the
display.
Press PLAY/REPEAT/ on the base, or
press REMOTE then PLAY/RPT/8 on the
handset. The TAD announces the num-
ber of messages and whether the mes-
sages are new or old (already listened
to). Then each new message plays, fol-
lowed by the day and time it was record-
ed.
When you have both old and new mes-
sages, the TAD first plays back only the
new messages.
M EM O REC/3
PLAY/
RPT/8
43-727.fm Page 26 Monday, December 20, 1999 4:28 PM