Radio Shack PRO-2050 - Manual (Page 27)

27
2. Select the bank you want to store
the trunked system’s frequencies
in by pressing a number key. The
scanner automatically selects the
first channel in the bank.
3. Use the number keys to enter the
trunked system’s frequencies,
then press
E .
4. Note: If you entered an invalid fre-
quency in Step 3, the scanner
beeps, the channel number
flashes and
Error appears. If
this happens, press CLEAR to
clear the frequency, then repeat
Step 3.
5. Press either MANUAL or s to
select the next channel in the
bank.
6. Repeat Steps 3 and 4 until all fre-
quencies have been entered.
SCANNING A TRUNKED
BANK
You can scan one trunked bank at a
time. Once you have stored frequen-
cies for a trunked system in one or
more of the 10 available banks and
you are scanning non-trunked fre-
quencies, follow these steps to begin
trunk scanning.
1. Press TRUNK . The indicators for
all banks flash.
2. Use the number keys to enter the
number for the trunked bank you
want to scan, then press
SEARCH
to begin searching for the trunk’s
data channel (the channel that
controls the trunk).
SEARCH
flashes as the scanner searches
for a data channel. When the
scanner finds it, it begins trunk
tracking.
If you entered all of the trunk’s fre-
quencies, you should be able to
follow conversations between
broadcasters even when they
change frequencies. IDs, which
represent different service groups,
appear.
20-430.fm Page 27 Wednesday, August 4, 1999 1:29 PM