Getting started, Inserting batteries into remote control, Set up and maintenance of the receiver – RCA HOME THEATER AV SURROUND RECEIVER RT2280 User Manual

Page 5: Protect your components from overheating

Advertising
background image

Getting Started

Unpacking The Speakers (RT2280/RT2250 Only)

• one set of speakers including 2 left and right front
speakers, 1 centre speaker, 1 subwoofer and 2 left
and right rear speakers.

• 6 speaker cables including:

Inserting Batteries into Remote Control

Insert two AA(R6) batteries according to the + and -
signs on the battery compartment. To use the remote
control, point it directly at your receiver.

Set up and Maintenance of the Receiver

• Provide spaces for sufficient ventilation as
indicated:

• Do not connect to the AC power cords until all
connections are completed.

• Do not use your set immediately after transferring
it from a cold place to a warm place: there is risk of
condensation.

• Do not expose your set to water and excessively
high temperatures.

• After having disconnected your set, clean the case
with a soft cloth, or with a slightly damp leather
chamois. Never use strong solvents.

Protect your Components from
Overheating

• Do not block ventilation holes in any component.
Arrange the components so that air can circulate
freely.

• Do not stack components directly on top of each
other.

• Allow adequate ventilation when placing your
components in a stand.

• Place an amplifier near the top shelf of the stand
so heated air rising from it will not affect other com-
ponents. If you have a satellite receiver, you should
place it on the top shelf.

EN

3

10 cm/4"

10 cm/
4"

10 cm/
4"

10 cm/4"

5 cm/
2"

FRONT SPEAKERS

CENTER SPEAKERS

SUB WOOFER

REAR SPEAKERS

(SURROUND SOUND)

2 X grey/black cable

for rear speakers

1 X brown/black

cable for subwoofer

1 X blue/black cable
for centre speaker

2 X red/black cable

for front speakers

Advertising
This manual is related to the following products: