RocketFish RF-BTCMBO - Manual (Page 17)

17 RF-BTCMBO
When the connection to the keyboard is established, this screen appears:
4 Use the paired keyboard to type the digits shown on the screen, then
press the Enter key. The keyboard is connected.
Note: The Bluetooth security code changes each time the keyboard is connected.
Note: The keyboard and mouse enter the power saving mode when not used for a
period of the time.
Using the Bluetooth mouse software
Installing the Bluetooth mouse software
To install the Bluetooth mouse software:
1 Make sure the WIDCOMM stack has been installed on your computer.
2 Plug the USB Bluetooth dongle into an available USB port on your
computer.
3 Insert the provided installation CD in the CD or DVD drive. The software
starts automatically.
Note: If the software does not load automatically, double-click Setup.exe in the bin
folder of the installation CD.