Ricoh IS 2075 - Manual (Page 135)

Supplementary Specifications
123
6
• Even if the direction of originals is different from that of the copy paper,
the machine will automatically rotate the image by 90°to make copies
properly.
• If you mix originals of different sizes or place originals in different orien-
tations, you cannot use this function.
• Four originals are copied onto each sheet of copy paper with this function.
If the number of originals scanned is less than a multiple of 4, the last page
is copied blank.
• The copying to make a magazine may take some time after scanning orig-
inals.
• If the Booklet Finisher is installed and you select "Magazine" and "Staple
(Saddle Stitch)", the copies are stacked, stapled at the center, folded in half
automatically and then delivered.
❖ ❖ ❖ ❖ Repeat
Depending on the paper size, ratio, and orientation of the paper, parts of re-
peated images may not be copied.
• If you use this function with "Custom Size Original", you can copy repeat-
edly the image in the area you want by specifying the vertical and horizon-
tal lengths from the base point. In this case, place your original on the
exposure glass.
⇒ p.14 “Placing Custom Size Originals”
1. Base point
2. Horizontal length
3. Vertical length
❖ ❖ ❖ ❖ Centering
Though the original is set to a different orientation than the paper, the ma-
chine will not rotate the image by 90
° (Rotate copy).
❖ ❖ ❖ ❖ Margin Adjustment
If you set a binding margin that is too wide, part of the image may not be cop-
ied. When making copies in Combine mode, the binding margin is added to
the copies after the combination is finished.