Roland DP-990 - Manual (Page 54)

54
Recording
The DP-990 recorder has three track buttons.
You can record the performance of each hand separately to different track buttons (for
example, the left-hand performance to the [Left] button and the right-hand performance
to the [Right] button), or you can re-record just a specific track of a previously recorded
performance.
fig.Panel-RecTrack-e.eps
Settings for recording
1.
Press the [Int Song/Ext Song] button.
If the display does not show the following, press the [Int Song/Ext Song] button until this indication
appears.
fig.d-USr.eps
Recording Your Performance Separately for Each Hand
How the track buttons correspond to the recorded performances
The recorded performances are assigned to the track buttons as follows.
● Twin Piano (p. 33), Split performance (p. 37)
● Normal performance (the entire keyboard plays a single tone), Dual
performance (p. 35)
• When you record with just one recording track specified
The performance will be recorded on the specified track.
• When you record with multiple recording tracks specified
Recording will take place in this order of priority:
[Right] button
➝ [Left] button ➝ [Accomp] button.
Track button
Recorded performance
Twin Piano Split performance
[Right] button Right area Right-hand tone
[Left] button Left area Left-hand tone
DP-990_e.book 54 ページ ２００９年２月１７日 火曜日 午前８時３０分