Before you play, Getting ready to play, Connecting the power cord – Roland RK-100 User Manual

Page 14: Turning the power on/off, Connecting the power cord turning the power on/off, Turns the power on/off (p. 14), Connect the included ac adaptor here (p. 14), Use this to fasten the ac adaptor cord (p. 14)

Advertising
background image

14

Before you play

1.

Make sure that the [Power On] switch located
at the left side of the keyboard is off (in the
upward position).

2.

Connect the AC adaptor to the VIMA, and plug
the power cord into an AC outlet.

You must use the power cord included with the VIMA.

fig.ACcord-e.eps

924

* To prevent the inadvertent disruption of power to your unit

(should the plug be pulled out accidentally), and to avoid
applying undue stress to the DC IN jack, anchor the power
cord using the cord hook, as shown in the illustration.

941

Once you’ve got everything connected properly, you can
turn on the power using the following procedure. If you
fail to perform these steps in the correct order, you risk
causing a malfunction or damaging your speakers.

Turning the power on

1.

Turn the [VOLUME] knob all the way toward
the left to minimize the volume.

fig.VolumeMin-e.eps

2.

Press the [Power On] switch.

fig.PowerOn-e.eps

942

Due

to a circuitry protection feature, this unit requires

a few moments after power is turned on before it is
ready for normal operation.

3.

Use the [VOLUME] knob to adjust the volume
(p. 15).

Turning the power off

1.

Turn the [VOLUME] knob all the way toward
the left to minimize the volume.

fig.VolumeMin-e.eps

2.

Press the [Power On] switch.

The screen goes blank and the power is turned off.

Getting ready to play

Connecting the power cord

To the
Power
Outlet

The cord of
the supplied
AC Adaptor

Cord Hook

Turning the power on/off

NOTE

NOTE

RK-100-e.book 14 ページ 2006年11月27日 月曜日 午後6時7分

Advertising