Changing the parameters shown in the tone screen – Roland V-Piano User Manual
Page 53
53
Customizing the V-Piano’s sounds
1.
Press and hold down one of the function buttons [F1]–[F4].
A list of the tone parameters will appear.
fig.customize-11.eps
2.
Continuing to hold down the function button, turn the [VALUE] dial to select the desired parameter.
fig.customize-12.eps
3.
Release the function button.
The parameter you selected is now assigned to that function button.
fig.EditParam03.eps
The state of the button assignments is saved in the tone (p. 51).
The function of opening the utility screen ([Utility]) can be assigned only to the [F4] button.
The parameters assigned to the function buttons are indicated using the following abbreviations.
Changing the parameters shown in the tone screen
Displayed (abbreviated form)
Parameter Name
Displayed (abbreviated form)
Parameter Name
SOUNDLIFT
Sound Lift
SOFTPEDAL
Soft Pedal Sense
STR.RESO
String Resonance
DMP.RESO
Damper Resonance
SND.BOARD
Soundboard Resonance
KEYOFF
Key Off Resonance
TUNING
Unison Tune
STRETCH
Stretch Tune
HAMMER
Hammer Hardness
RESONANCE
Cross Resonance
DECAY
Decay Time
TONECOLOR
Tone Color
DMP.TIME
Damping Time
DMP.NOISE
Damper Noise Level
V-Piano_e.book 53 ページ ２００９年１月２８日 水曜日 午前９時１０分