Ricoh Caplio R2 - Manual (Page 35)

33
Q
u
ick G
u
id
e
A frame of green is displayed at the focus
position.
In some cases, several frames may
appear.
Reference
When specifying a focus position at macro shooting, use the AF target shift function. (P.83)
5.
Gently press the shutter button all
the way.
The still image you have taken freezes
for a moment on the LCD Monitor and is
recorded.
Note
• Press gently to prevent camera shake when you press the shutter release button.
• The mark indicates that blurring may occur. Hold the camera still and focus the
camera again.
• When shooting in a dark place, the camera raises the focusing performance (auto focus
precision) by preliminary flashing immediately before shooting. This preliminary flashing is
skipped for shooting in no-flash mode.
• When the [LCD CONFIRM] is set to OFF in the setup screen, the still image shot will not be
displayed on the LCD monitor.
Reference
For how to change the image confirmation time, see P.115.