Enable the telephony service, Assign phone numbers, Chapter 4 – RCA SpeedTouch 716v5 (WL) User Manual
Page 57
Advertising
Chapter 4
Voice over IP
E-DOC-CTC-20050401-0008 v1.0
49
Enable the telephony
service
Proceed as follows:
1
Go to the SpeedTouch™ web pages.
2
In the menu select Toolbox > Telephony.
3
On the top right, click Configure.
4
Select Service Enabled.
5
Click Apply.
Assign phone numbers
To configure your Internet SIP telephone numbers:
1
Go to the SpeedTouch™ web pages.
2
In the menu select Toolbox > Telephony.
3
On the top right, click Configure.
4
Assign phone numbers to phone port 1 (FXS1) and phone port 2 (FXS2). If you
want to use the same number for both ports, select Port ‘all’.
5
Click Apply.
For more information, see
“1.3.1 Access via the Web Interface” on
The phone numbers are provided by your provider.
Advertising