Roland KR-17 - Manual (Page 179)

179
Chapter 10 Connecting External Devices
Chapter10
Connection Examples:
Connection with an Apple Macintosh computer
Use a computer cable (sold separately) to connect the
Computer connector on the KR to the modem port (or printer
port) on the Apple Macintosh. Set the Computer switch to
“Mac.”
When using the Macintosh “Patch Bay” utility, specify 1
MHz as the Interface Type (MIDI Interface Clock).
fig.09-
Connection with an IBM PC
Use a computer cable (sold separately) to connect the
Computer connector on the KR to the COM1 or COM2 serial
port on the IBM PC. Set the Computer switch to “PC-2.”
fig.09-
Apple Macintosh
Macintosh IIci
Modem Port
Computer cable (sold separately)
RS-232C
IBM PC/AT
Computer cable (sold separately)
KR-17_15_e.book 179 ページ ２００４年１２月６日 月曜日 午後１時５４分