Blackberry 8320 - Manual (Page 237)

Select WEP key:
Set the type of WEP key for the Wi-Fi network.
WEP key:
Type the WEP key for the Wi-Fi network in hexadecimal format.
Pre-Shared Key:
Type the WPA™ Personal pass phrase for the Wi-Fi network.
User name:
If necessary, type the user name that you use to connect to the Wi-Fi network.
User password:
If necessary, type the user password that you use to connect to the Wi-Fi network.
CA certificate:
Set the root certificate that your BlackBerry® device should use to verify that it is connecting to the correct Wi-Fi network.
Client certificate:
Set the authentication certificate that your device should use to connect to the Wi-Fi network.
Inner link security:
If necessary, set the security protocol that the Wi-Fi network supports for its inner authentication method.
Use hard token:
Set whether you use a hardware token to connect to the Wi-Fi network.
Token serial number:
If you use a software token to connect to the Wi-Fi network, set the token serial number.
Server subject for certificate validation:
If necessary, type the server subject name your device should use to verify that it is connecting to the correct Wi-Fi network.
Server SAN for certificate validation:
If necessary, type the server subject alternative name your device should use to verify that it is connecting to the correct Wi-Fi network.
IMSI:
If your SIM card has more than one IMSI, set the IMSI that you use to connect to the Wi-Fi network.
Wi-Fi profile IP and DNS options
Automatically obtain IP address and DNS:
Set whether your BlackBerry® device receives a routable IP address, a subnet mask, DNS settings, and a gateway address from the
Wi-Fi® network.
IP Address:
235