Set-up, 2set-up, 7bbc 7 – Roberts Radio RD-1 User Manual
Page 31: Radio data interface (rdi) output - dab
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Radio Data Interface (RDI) output - DAB
Your radio is equipped with an RDI optical output socket (TosLink) which
can be used to connect your radio to an external data decoder.
The default setting for the RDI optical output is Off (so as to conserve
battery life). To switch on the Digital Output proceed as follows:-
1.
Press the Setup button to enter Setup menu.
2.
Rotate the Tuning control until the DAB section appears between
the two black lines on the display. Press in and release the Tuning
control to confirm the selection
3.
Rotate the Tuning control until the More... line is highlighted in the
display. Press in and release the Tuning control to confirm the
selection
4.
Rotate the Tuning control until the RDI Enable line is highlighted
in the display.
5.
Press in and release the Tuning control to enter adjustment mode.
6.
Rotate the Tuning control to select required setting (Yes or No)
Press in and release the Tuning control to confirm the selection.
7.
Repeatedly press and release the Setup button until the display
returns to show normal station mode.
Set-Up
Buzzer Alarm
Radio Alarm
Record Timer
AUTO
Set-up
1
Press
to select
TUNING
2
Set-Up
Record Timer
Clock
DAB
Display
Sleep
AUTO
Press
to select
TUNING
4
Set-up
7
BBC 7
The Brighton Mystery
Journalist Polly solves murder
mysteries with the help of a
mystery Man in a tea room
11:10
18-May-2004
AUTO
DAB
Audio 2
...
Optical output
Yes
RDI Enable
Storage
On
Storage Control
...
Service Status
...
No
AUTO
30