Radio Shack ET-1755 - Manual (Page 6)

6
%100'%6+0)"61"#016*'4"
2*10'"
The phone is equipped with a DATA jack so you can connect
another phone or an answering machine to LINE2. You can
plug one end of a modular cord into either
LINE L1/L2 or L3 ,
or DATA at the right side of the phone, then plug the other
end into the jack of another phone or an answering
machine. You cannot use LINE 2 while another phone or
answering machine is connected to
DATA and in use. LINE
1 and LINE 3 still function normally. When you are finished
using another phone or answering machine, LINE 2 will be
available.
%100'%6+0)"6*'"*#0&5'6"
%14&
Plug the supplied coiled handset cord into the jacks on the
handset and the left side of the phone. Your local
RadioShack store sells a variety of longer coiled handset
cords, which are especially useful when you mount the
phone on the wall.
.+0'"+0&+%#6+105
The line indicators show you which line is in use or on hold.
If a line is in use, the indicator lights. If a line is on hold, the
indicator flashes.
'0#$.+0)"#0&"&+5#$.+0)"
6'.'2*10'".+0'5
1. Press and release STORE . The LOWER indicator
flashes twice.
2. Press and release HOLD .
3. Press and release the line button to select the
telephone line you want to enable.
To disable the telephone line, repeat Steps 1–3.
±
+PFKECVQT .KPG
Off Not in use
On steadily In use
Flashing rapidly Ringing
±
"016'"
±
"
• If you do not have three
subscribed telephone lines for
the phone, be sure to disable
the unused line.
• You can enable or disable the
telephone lines with the handset
on or off the hook.