Radio Shack 63-1039 - Manual

Indoor / Outdoor
Car Thermometer
with Voltmeter
63-1039
Battery Installation
The thermometer requires two AAA batteries
(not supplied) for power.
1. Slide the battery compartment cover in the
direction of the arrow to remove it.
2. Insert the batteries as indicated by the
polarity symbols (+ and –) marked inside.
3. Replace the battery compartment cover.
Mounting the Thermometer
Place your thermometer on a flat surface inside your car. For measuring
outdoor temperature, the thermometer's sensor cord extends up to 10 feet.
Mounting the Bracket
1. Clean the desired location inside your car with a soft cloth.
2. Peel off one side of adhesive paper from the supplied mounting stickers,
and attach the stickers to the back of the supplied mounting bracket.
Then, peel off the paper on the other side of the sticker.
3. Firmly press the bracket onto the desired car location.
4. Slide the thermometer onto the bracket.
Mounting the Sensor
1. Peel off the paper from the back of the sensor to expose the adhesive
tape.
2. Firmly press the sensor against a clean, flat surface on the outside of
your vehicle.
Step One
Step Two
Setting the Time
1. Repeatedly press MODE until the time and
indoor temperature (IN), or the time and
outdoor temperature (OUT) appear on the
display.
2. Repeatedly press or hold down HR until
the correct hour digits appear.
3. Repeatedly press or hold down MIN until
the correct minute digits appear.
4. To select 12- or 24-hr time format, hold
down C/F until the time display changes to
the desired format.
Step Three
Using the Thermometer
1. Extend the sensor cord and attach the
sensor to the outside of your car.
2. Repeatedly press MODE until the time and
outdoor temperature (OUT), outdoor
temperature (OUT) and voltage (V), or
outdoor temperature (OUT) and indoor
temperature (IN) appears on the display.
3. Repeatedly press C/F to select Celsius or
Fahrenheit. The current temperature (IN or
OUT, depending on your display view)
appears.
Step Four
What’s Included
• Indoor/Outdoor Thermometer
• Adapter
• Mounting Bracket
• Mounting Stickers (2)
• Voltmeter
Sensor Cord
Adapter
12V DC