RIDGID SR-60 - Manual (Page 5)

Ridge Tool Company

Elyria, Ohio

U.S.A
www.seektech.com 3
SeekTech SR-60
SR-60 Use and Care
•
Use equipment only as directed. Do
not operate the SR-60 unless you have
read the operator’s manual.
•
Do not immerse the antennas in
water. Store in a dry place. This will
reduce the risk of electric shock and
instrument damage.
•
Store idle equipment out of the
reach of children and other
untrained persons. Equipment is
dangerous in the hands of untrained
users.
•
Maintain the instrument with care.
Properly maintained diagnostic
instruments are less likely to cause
injury.
•
Check for breakage of parts, and any
other conditions that may affect the
SR-60’s operation. If damaged, have
the instrument serviced before using.
Many accidents are caused by poorly
maintained tools.
•
Use only accessories that are
recommended by the manufacturer
for the SR-60. Accessories that may
be suitable for one instrument may
become hazardous when used on
another.
•
Keep handles dry and clean, and
free from oil and grease. Allows for
better control of the instrument.
•
Protect against excessive heat. The
product should be situated away from
heat sources such as radiators, heat
registers, stoves, or other products that
produce heat.
Service
•
Diagnostic instrument service must
be performed only by qualified repair
personnel. Service or maintenance
performed by unqualified repair
personnel could result in injury.
•
When servicing a diagnostic
instrument, use only identical
replacement parts. Follow instructions
in the maintenance section of this
manual. Use of unauthorized parts or
failure to follow maintenance
instructions may create a risk of
electrical shock or injury.
•
Follow instructions for changing
accessories. Accidents are caused by
poorly maintained equipment.
•
Provide proper cleaning. Remove
battery before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
•
Conduct a safety check. Upon
completion of any service or repair of
this product, ask the service technician
to perform safety checks to determine
that the product is in proper operating
condition.
•
Damage to the product that requires
service. Remove the batteries and
refer servicing to qualified service
personnel under any of the following
conditions:
o If liquid has been spilled or objects
have fallen into product;
o If product does not operate normally
by following the operating
instructions;
o If the product has been dropped or
damaged in any way;
o When the product exhibits a distinct
change in performance.
CAUTION
Remove batteries entirely before shipping.
If you have any questions regarding the service or
repair of this machine, call or write to:
Ridge Tool Company
Technical Service Department
400 Clark Street
Elyria, Ohio 44035-6001
Tel: (800) 519-3456
E-mail:
[email protected]
www.ridgid.com