RoyalTek RGM-3600 - Manual (Page 8)

8
RGM-3600 Operational Manual
． ． ． ．RXA
This is the main receiver channel and is used for receiving software
commands to the board from SiRFdemo software or software written by
users themselves.
PS: Pull up if not used.
． ． ． ．TXA
This is the main transmitting channel and is used for outputting navigation and
measurement data for SiRFdemo software or software written by users
themselves.
． ． ． ．Boot
Set this pin to high for programming flash.
Cable connector
- 6Pin Male PS2 RS-232 Interface Pin Number:
- 6Pin Male PS2 TTL Interface Pin Number: