Rosewill RC-409LX - Manual (Page 7)

5-port Gigabit Desktop Switch RC-409LX User Manual
Chapter 2 Installation
 Mounting the Switch on a Desk
To install the Switch, please follow the steps:
1 You can place the Switch on a flat desk.
2 Please inspect the Power Adapter carefully and make sure that it is properly connected to a power
source.
3 Ensure adequate ventilation space around the switch for dissipating heat and air.
Note:
Please avoid any heavy thing placed on the switch.
 Power On
RC-409LX 5-port Gigabit Desktop Switch can be used with DC power supply. Powering on the
Switch, it will automatically initialize and its LED indicators will respond as follows:
Name Time Status Indication
Power All the time On Power on
1st-3rd
second
Off N/A
On (yellow) No device connected to the corresponding port.
4th-6th
second
On (green)
There is a 10/100/1000Mbps device connected to the
corresponding port.
Off No device connected to the corresponding port.
On (yellow)
There is a 10/100Mbps device connected to the corresponding
port.
LEDs
(port
1-5)
7th
second ~
On (green)
There is a 1000Mbps device connected to the corresponding
port
Note:
If the LED indicators don’t respond as described above, please check the power supply and its
connection.
- 7 -